Building the Specialized Venge Vias

Here are some more photos of building up the bike this morning and then some photos of afterward.  There were many good concepts behind the hidden cable design and mounts as well as possibilities for having Junction A externally mounted beneath the adjustable Garmin mount on the front of the handlebars.  Some of the setup for the front brake is difficult and I have to trim the cable several times and re-sleeve it before it actuated correctly and smoothly.  The routing over the the steerer tube of the brake hoses and Di2 wire was well thought out and (while tight) came together great.  The addition of the carbon waterbottle cage (included) with the SWAT tool and mounting bracket below the cage was a nice touch.  We immediately went for Supakaz Black Kush tape instead of the stock white and also replaced the white Power saddle with a black one to stealth it out.  All in all, it built nicely and looked good in the final photos.  Final weight with the cage and SWAT (no pedals) as stock build for a 56cm was 17.57 lbs.  I am just going to display all the photos below right after each other so you can see the details.  Message or comment with any questions!

SpecializedVengeVias001 SpecializedVengeVias002 SpecializedVengeVias003 SpecializedVengeVias004 SpecializedVengeVias005 SpecializedVengeVias006 SpecializedVengeVias007 SpecializedVengeVias008 SpecializedVengeVias009 SpecializedVengeVias010 SpecializedVengeVias011 SpecializedVengeVias012 SpecializedVengeVias013 SpecializedVengeVias014 SpecializedVengeVias015 SpecializedVengeVias016 SpecializedVengeVias017 SpecializedVengeVias018 SpecializedVengeVias019 SpecializedVengeVias020 SpecializedVengeVias021 SpecializedVengeVias022 SpecializedVengeVias023 SpecializedVengeVias024 SpecializedVengeVias025 SpecializedVengeVias026 SpecializedVengeVias027 SpecializedVengeVias028 SpecializedVengeVias029 SpecializedVengeVias030 SpecializedVengeVias031 SpecializedVengeVias032 SpecializedVengeVias033 SpecializedVengeVias034 SpecializedVengeVias035 SpecializedVengeVias036 SpecializedVengeVias037 SpecializedVengeVias038


The New Specialized Venge Vias

Hey everyone!  We’ve just got the one of the first Specialized Venge Vias bikes in the shop.  More photos of the completed bike to come later today!  It definitely looks sleek with the aero brakes and curvy handlebar.  The 64SLX Rapide wheels seem really light and also quite aero.  I’ll try to have a few photos of actual weights for the wheels and the complete bike with Shimano Dura-Ace Di2 11 speed.  While the brakes look tucked into the frame, they seem easy to work on and I noticed all the little bits in the packaging made sense with flexible brake noodles leading to the brakes and the wires and junction tucked away nicely in the stem and under the bottom bracket.  One thing I really liked the concept of was the control unit and charging port located under the bottom bracket shell in a nice protective case (Junction A).  This means Junction B is placed up at the stem (hidden away), which is reverse of how you would normally install them.  More to follow!!!

Junction A inside BB shell case Aero Handlebar Rear Brake CLX64 Rapide wheels Vias Interesting downtube shape No brake mount holes here!  Aero front brake A very proprietary stem, but looks awesome Top view of stem Ceramic BB, SWORKS crank Front brake from behind the fork Another shot of brake. Rear brake Another rear brake photo Comes with a Quarq power meter!!! Charging port for Di2